5 Blade Pack - Rip/Rough/Resaw
14" - 17" Saw with 10"+ capacity
3804PC, 1204PC, 1203AS, 1223VPC, 3423VPC

__________________________________________________________

Timber Wolf® 3/8" x 4PC
Blade Designation: Ripping

Width: 3/8"
TPI (Tooth Per Inch): 4
Tooth Design: PC (positive claw)
Blade Thickness: .025
Kerf: .042
Tooth Hook Angle: 6.5°
Tooth Set Pattern: 5 Raker Set
Radius of Cut: 1 1/4”

Thickness of Work Material to be cut
Kiln Dry Wood: Hardwood 2 1/2” - 6" Softwood 1 1/2” – 4”
__________________________________________________________

Timber Wolf® 1/2" x 4PC
Blade Designation: Ripping and Crosscutting

Width: 1/2"
TPI (Tooth Per Inch): 4
Tooth Design: PC (positive claw)
Blade Thickness: .025
Kerf: .042
Tooth Hook Angle: 6.5°
Tooth Set Pattern: 5 Raker Set
Radius of Cut: 2 1/2”

Thickness of Work Material to be cut
Kiln Dry Wood: Hardwood 2 1/2” - 6" Softwood 1 1/2” – 4”
__________________________________________________________

Timber Wolf® 1/2" x 3AS
Blade Designation: Roughing or Milling Green Wood/Logs

Width: 1/2"
TPI (Tooth Per Inch): 3
Blade Thickness: .032
Kerf: .056
Tooth Hook Angle: 6.5°
Tooth Set Pattern: AS (alternate set)
Radius of Cut: 2 1/2”

Thickness of Work Material to be cut
Kiln Dry Wood: Hardwood 3" - 12" Softwood 3" - 12”
Green Wood: Hardwood 3" - 12" Softwood 3" - 12”
__________________________________________________________

Timber Wolf® 1/2" x 2/3VPC
(for material at least 5" thick)

Blade Designation: Resawing Kiln Dry Domestic Wood or
Roughing (dry wood)

Width: 1/2"
TPI (Tooth Per Inch): 2/3
Tooth Design: VPC (variable positive claw)
Blade Thickness: .025
Kerf: .048
Tooth Hook Angle: 6.5°
Tooth Set Pattern: 5 Raker Set
Radius of Cut: 2 1/2”

Kiln Dry Wood: Hardwood 5" - 12" Softwood 5" - 10”

__________________________________________________________

Timber Wolf® 3/4" x 2/3VPC
(for material at least 3" thick)

Blade Designation: Resawing Kiln Dry Domestic Wood

Width: 3/4"
TPI (Tooth Per Inch): 2/3
Tooth Design: VPC (variable positive claw)
Blade Thickness: .025
Kerf: .049
Tooth Hook Angle: 6.5°
Tooth Set Pattern: 5 Raker Set
Radius of Cut: 5 7/16"

Thickness of Work Material to be cut
Kiln Dry Wood: Hardwood 3" - 12" Softwood 3" - 10"
__________________________________________________________

Select a single blade length from drop-down boxes below.